equipment
Maintenance Tips | Saving Calculator | Peak Performance Service | Generator Service Agreement
Peak Performance
You’ll get more mileage out of your comfort systems with our Peak Performance Service Agreement. We’ll inspect and service your systems twice yearly, just prior to the peak heating and cooling seasons, to make sure all parts are operating efficiently. We recognize that units operating at maximum efficiency and safety levels are what you expect. Please call our office today for more information or to sign up for the Peak Performance Service Agreement 251-0885.
Services performed during a Peak Performance service are as followed:
Heating service performed in fall:
1. Clean and inspect burners
2. Clean and inspect heat exchanger
3. Check all gas connections for leaks and tightness
4. Clean or replace filter
5. Clean return air chase
6. Clean and inspect blower wheel
7. Check and/or adjust all limits, safeties, sensors, etc.
8. Check blower bearings
9. Oil all furnace motor bearings
10. Check all flues for open and proper venting
11. Check all electrical connections for tightness
12. Check calibration and proper operation of thermostat
13. Check and inspect furnace for proper and efficient operation
14. Clean condenser coil*
15. Clean trash and debris out of condenser*
16. Check defrost cycle*
17. Check and adjust refrigerant pressure*
18. Check emergency heat cycle*
19. Check for refrigerant leaks*
*Heat pumps only
Air conditioning service performed in spring:
1. Clean condenser coil
2. Oil all motors
3. Clean debris out of condenser
4. Clean or replace filter
5. Clean return air chase
6. Check all motor bearings
7. Check and adjust refrigerant pressures
8. Check and clean drain lines
9. Check calibration and operation of thermostat
10. Check all electrical connections for tightness
11. Check for refrigerant leaks
12. Clean and inspect blower wheel
